DeconGel1108

DeconGel 1108 Gel

DeconGel 1108 is recommended for decontamination of radioisotopes as well as particulates, heavy metals, water-soluble and insoluble organic compounds, including tritiated compounds. The hydrogel coating can be applied to horizontal, vertical and inverted surfaces and can be applied to most surfaces including bare, coated and painted concrete, aluminum, steel, lead, rubber, plexiglas, herculite, wood, porcelain, tile grout, and vinyl, ceramic and linoleum floor tiles. When dry, the product locks the contaminants into a polymer matrix. The film containing the encapsulated contamination can then be peeled and disposed of according to appropriate local, state and federal regulations.

Advantages of DeconGel 1108

  • No preparation or mixing required
  • Easy application
  • Simple decontamination
  • High decontamination factors
  • User and material/substrate friendly
  • Minimal odor, respirator requirement determined by substance and environment
  • Penetrates and removes contamination from cracks, pores and voids
  • Dries into tough film that is easy to peel and dispose
  • Minimizes contaminated waste material
  • Ability to re-hydrate for forensics
  • Wet Analysis

Filtration of particulates

  • Product Characteristics (for reference only)
  • Appearance Blue liquid
  • Applicator Paint brush, V-tooth trowel
  • Density 8.35 – 8.65 lbs/gal
  • Viscosity 8,000 – 18,000 cps (Brookfield, spindle 4, 30 rpm, 25°)
  • pH 4.0 – 7.0
  • Decontamination Up to 100%
  • Average coverage 25 to 150 ft² per gallon
  • Preparation Ready to use
  • Shelf life 5 years